Innovate Motorsport's LM1 AFR Meter

DeltaDash now includes support for Innovate Motorsport's LM1 wideband lambda meter. By using a spare serial port on the PC or laptop, accurate AFR measurements may be recorded alongside parameters from the ECU.

Configuration

Once the LM1 is plugged into a serial port on your PC, DeltaDash may be configured from the external sensor options sub menu. Simply select the correct serial port and tick the checkbox to enable use of the LM1.

The data channels relating to the LM1 will then appear under the external sensors tab of 'Live ECU data capture'.

Note that in order to connect the LM1 to DeltaDash, a serial port must be available. If there are no free serial ports on your laptop, then you must connect the LM1 via a USB to serial interface available from most PC suppliers.
In order to support logging of data via its serial port, the LM1 must be running firware version 1.30 or above. This is freely available from Innovate Motorsports, should your meter have an earlier firmware version.
Support for the LM1 has been recently added. The latest version of DeltaDash should be downloaded in order to use this feature.