High Flow 800cc Motorsport Injectors
We are pleased to announce that we now have available an 800CC injector kit for the 2008 - 2011 Mitsubishi EVO X.
During product development, results showed that the standard injectors ran out of delivery capacity at around 375BHP. EcuTek have extensively tested these injectors from power outputs from 450BHP to over 600BHP and there is still capacity to spare.
These injectors are a perfect fit, with the injection nozzle protruding into the inlet manifold in exactly the same position as the standard injectors. Other aftermarket injectors either impede airflow by protruding too far into the intake, or release fuel into the injector housing, resulting in decreased airflow or poor fuel metering.
Due to their position and design, these injectors produce significantly better fuel atomisation than any other high flow injector, providing you with better fuel consumption, and combined with their excellent distribution at low flow rates, mean there are none of the usual problems at idle and slow running.
They come as a complete kit with everything needed for an easy fit, including the following:
- 4 High flow matched fuel injectors
- 4 Injector body to fuel rail adapters
- 4 Wiring harness adapters
- 4 Injector retaining clips
- 2 Fuel rail spacers
- Detailed fitting instructions
Calibration of the injectors is as simple as making one change to the Injector Scaling map using EcuTek software.
The kit fits the Mitsubishi EVO X models from 2008 - 2011 including the SST, GSR, Ralliart and special edition models.
For more information, please email: 
To purchase our Injector Kits, please fill out the 
injector order form
and email it to .
These are not for general sale to the public and are only available to EcuTek dealers. Please visit our Dealer Locator to find your nearest EcuTek tuner.
EcuTek Injectors used in the Britcar 24h
This web site, content and software is Copyright © EcuTek 2010