ProECU Honda Civic Type R FN2 & derivatives

Supported Models

  • Honda Civic Type R with FD2/FN2 chassis (Asia, Australia, Europe, Japan including Mugen, 2006-2012)
  • Civic Si (USA/Canada 2006-2012); and the Acura CSX Type S (Canada 2007-2010​).
  • Aerial Atom with supported engine codes. 
  • Supported engine codes: K20Z1 to K20Z4.

RaceROM Custom Features

RaceROM Custom features are written into our tuning software to give you unique features that don’t come as standard. They need to be set up by an EcuTek tuner and you may be charged extra as they take time to configure

  • Four-way Map Switching (with rev-counter indication)
    1. Swap between four different maps using ECU Connect on your mobile device. For example, Track Mode; Fast Road Mode, E85 Mode; Economy Mode. It’s up to you to decide what set-up you want in each map.
  • Adjustable Launch Control
    1. Live adjustment of the launch RPM using the cruise-control switchgear or using ECU Connect.
  • Flat-foot Shift
    1. Make full-throttle gearshifts by reducing engine torque and controlling the engine speed during the gear change.
  • Auto Blip
    1. Applies a short burst of throttle when downshifting under braking to provide a smooth entry into the next gear
  • Accelerator Pedal Trim
    1. Let’s you profile the relationship between the accelerator position and the throttle butterfly opening for a given RPM and vehicle speed. Adjust this live on your phone using ECU Connect.
  • Hybrid SD (and Alpha N option)
    1. Provides a transition from MAF to SD, while Alpha N is for throttle bodies that don’t use MAF or MAP
  • VTEC Activation
    1. Adjust VTEC activation against RPM and manifold pressure. Adjust this live on your phone using ECU connect
  • Closed-Loop Boost Control
    1. You can have a wastegate-solenoid-driven boost control on forced-induction setups, either simple open-loop or sophisticated closed-loop with proportional and integral control and gear, temperature and altitude compensations
  • E85 and Flex-Fuel
    1. Run a dedicated map for E85 ethanol or run a totally self-adjusting Flex-Fuel set-up.
  • Fail-Safe Maps
    1. Create fail-safes with your tuner to save the engine in the event of a problem such as lean running at high RPM
  • 2x ECU Voltage Inputs (0-5V)
    1. Use this as desired to import sensor signals and extend the functionality of the ECU
  • 1x ECU Output Solenoid Driver (Frequency Based)
    1. Can be used as a wastegate solenoid control valve on turbocharged models
  • Adjustable Traction Control
    1. This can be adjusted either using ECU Connect on your phone or a simple 0-5V potentiometer in the car.

ECU Connect – Use your phone to control your tune

In conjunction with our ECU Connect Interface, our free ECU Connect App can be used to control some of our custom RaceROM features on the Honda Civic Type R platform. Find out more about ECU Connect here

ECU Connect Features for Honda Civic Type-R

The following features need to be set up in the tune by your tuner before they can be accessed by the ECU Connect App.

  • Map Switching
    Switch between four different maps as detailed above on the fly using your phone.
  • Boost Controller for forced induction set-ups
    Adjust your boost in each map using sliders on your phone.
  • Launch Control
    Adjust the launch control RPM using a slider on your phone. This is very handy for cars without cruise control fitted.
  • Custom Features set up by your tuner
    You have up to five features that can be controlled using your mobile device. Configurable as a slider, numerical value or on/off switch, these inputs can be set up to interact with the ECU directly from the driver’s mobile device. Speak to your tuner to discuss what you would like. Typical features you could set up are:
    • Make your Traction Control more or less aggressive
    • Activate your Nitrous
    • Set up a Push To Pass button
    • Set up a pit lane speed limiter
    • Adjust your pedal map

For more detail on ECU Connect features for the Honda Civic Type-R Platform Platform, click here

And there’s more…

  • Monitor 100s of engine and gearbox parameters
  • Create unlimited personalised dashboards to monitor what you need
    Click here to find out more about dashboards
  • Read and clear DTCs (Diagnostic Trouble Codes)
  • Check your before and after a tune with the Performance Analyser
  • Set up and send logs to your tuner direct from the app

Note: The above features do not require an EcuTek Tune and are available on nearly all vehicles manufactured after 2008


Find Your Local EcuTek Dealer
There are over 1,000 EcuTek dealers covering most countries in the world. If you want to get your car tuned, we have you covered.
Find An Authorized Dealer